quinta-feira, 2 de outubro de 2014

Receita de Fralda Bordada

Não tem coisas mais fofas que roupas de bebês, agora, imagine lindos bordados de patinhos decorando as fraldinhas. 

Recebi esta receita por email, e trouxe para compartilhar com vocês.

Diretamente dos estúdios da Bazar Horizonte...


Material:
– Fralda Estilotex para bordar
– Meadas Maxi Mouline nas cores: 143, 115, 606, 612, 354 e 712
– Agulha para bordado; – 1 par de olhos móveis
– Mini rosas de cetim; – Fita de cetim amarela
– Passa-fitas; – Bordado inglês
– Cola universal







Saudade...

Boa tarde amigo leitor!

Vocês tem todo direito de dar aquele puxãozinho de orelha... Minha última postagem foi em Maio. o.O
Acredite, parece que cada vez arrumo mais coisas para fazer fica meio complicado preparar material para subir no blog.

Mas, vamos ao que interessa...

Como vão os projetos de vocês?
Vão concluir todos os projetos que iniciaram este ano?
Está na hora de fazer reavaliações e definir melhor nossas prioridades.
2014 está quase no fim, ano que vem teremos aumentos de energia, gasolina e a inflação continua bombando. Sim, tudo isso está por vir, mas nós podemos correr atrás.
Podemos trabalhar, estudar, se aprimorar para conquistar aquele aumento de salário, ou até a troca de trabalho.

O fios e eu, logo passará por algumas mudanças...
Estou ainda pensando sobre o que, com,o e se, vou manter este blog.Acredite manter 4 Blogs, um site, face, fan page, tem sido muito complicado para mim. Trabalho, estudo, casa, artes, e responsabilidades.
Chega uma hora que é difícil dar conta, isso porque acredito que não basta fazer, tem que ser bem feito ainda.
Maaaassss, nada está decidido. Estou pensando, pensando e pensando...

Assim que decidir deixo mais um período no ar, para vcs pegarem o material que quiserem, viu como eu sou legal? kkk

Então, apertem os cintos que por enquanto vem novas postagens.

;)

segunda-feira, 5 de maio de 2014

Cofrinho Porquinho de Jornal

Reciclar é ótimo, ainda mais quando o produto gerado possar ser super útil, não é mesmo?

A dica de hoje, é reciclar jornal, e fazer um gracioso porquinho - cofrinho.

Segue o passo a passo.

Materiais Necessários

  • Balão (tamanho pequeno);
  • Rolhas de cortiça (Rolhas das garrafas de vinho). Se não tiver pode utilizar tampas de garrafas pet;
  • Tampinha de garrafa plástica (;
  • Pedaços de jornal;
  • Cola branca;
  • Fita adesiva dupla face;
  • Tinta PVA ou tinta guache;
  • Feltro;
  • Caneta esferográfica preta;
  • Pincéis: (para colagem e pintura).

Montando passo-a-passo o porquinho.

porquinho jornal2
1) Separe os materiais que você irá utilizar. O primeiro passo é encher o balão. Cole as rolhas
porquinho jornal3
2) Após encher o balão, corte as rolhas em um tamanho que você considere ideal para a sustentação do porquinho e cole-as com o auxílio da fita dupla face na parte inferior do balão. Após este processo, fixe a tampinha de garrafa plástica na frente do balão para dar início à criação do nariz do porquinho. Cole o jornal
porquinho jornal4
3) Misture cola branca com água para que ela fique mais rala. Corte tiras dos pedaços de jornais e mergulhe-as na mistura de cola branca. Retire as tiras e o excesso de cola e coloque uma por vez sobre o balão, as rolhas e a tampinha, até cobri-los inteiramente. Após cobrir inteiramente o porquinho, tenha certeza de que não há nenhuma bolha de ar. Isso é importante para dar consistência e um aspecto uniforme ao seu porquinho. Finalize o porquinho
porquinho jornal5
4) Deixe a primeira camada secar completamente e depois adicione outra camada de jornal. Adicione mais camadas se você achar necessário. Tudo depende da consistência do seu porquinho. Assim que todas as camadas estiverem secas, pinte o seu porquinho com tinta guache ou PVA, à sua maneira.
Para finalizar seu projeto, você pode criar orelhinhas com feltro e marcar os olhos e nariz com caneta esferográfica preta.
Porquinho_jornal
Créditos das imagens: The Southern Institute
Este artigo foi publicando tendo como fonte principal ao artigo Papier Mache Piggies
Uma dica interessante é que você pode utilizar a mesma estrutura deste projeto para realizar outros objetivos de decoração. Use e abuse da sua criatividade.
E ai o que achou desta proposta?
Não deixe de comentar e compartilhar…
Um grande abraço e até a próxima.

Fonte: http://artesanatonet.com.br/

quinta-feira, 17 de abril de 2014

Macaco de Meia

Eu sou uma apaixonada por bonecas, e bichinhos de pano. Adquiri este sentimento depois de véia rss, porque quando pequena achava meio fajuto, se é que me entendem. Mas hoje amadureci, e minha ótica mudou, fajuto é uma borracha feita aos milhares.
Originais são as bonecas feitas à mão, que receberam atenção e carinho na fabricação.
Quem faz boneca, não é só artesão, expõe seu lado infantil através de gestos firmes de um adulto.
Bichos artesanais são criados e produzidos com sentimentos, e não somente com o enfado de mais um dia de trabalho, onde se deve cumprir um número de produção.

VIVA OS BICHINHOS ARTESANAIS     \0/

Macaquinhos de meia, lindinhos não?

 How To Sew Sock Monkey
Sewing Pattern: Download pattern here. It contains the eyes, ears and pattern for drawing the sock.
Materials:
Make: 1 (adult size)
1. Sock (crew length), 1 pair (I used striped sock so that it is easy to get the alignment right.)
2. White felt
3. Button eye 7/16″ [11.5mm], black, 2 (for toddler monkey, use 3/8″ button)
4. Embroidery Floss, yellow
5. Poly-fill stuffing material
6. Batting, or thick aquarium filter pad (you can get it from pet shop)
7. Letter size paper, 1
Tools:
1. Sewing machine
2. Sewing needle (prefer long) and pins
3. Scissors
4. Erasable fabric marker
5. Iron
6. Printer
Seam Allowance: approx. 1/8 – 1/4″
Note: for different sizes of sock monkeys, use different sizes of socks.
Since the sock is stretched after stuffed, thick sock yields better quality than thin sock.
 Prepare all the materials needed as described above.
Cut the eye from white felt by following the download pattern above. Mark the button eye position.
If your socks have folded cuff, remove the stitches carefully and don’t accidentally cut the sock. Flatten the fold to have a longer length.
 Turn the sock to wrong side, align sock as per photo below. Press with warm iron.
 Draw pattern on the sock with erasable fabric marker. Since not all socks are the same, I can’t make a standard pattern for you to trace.
If you haven’t had the pattern, download it here and print it out.
 1. Align the stripes on both layers, pin.
2. Sew it with sewing machine, best if you have walking foot so both layers walk together. You can use hand sewn too.
3. Cut as per pattern.
4. Cut all pieces out.
 There will be an opening created between the legs. Use this opening to turn the sock right side out.
 1. Insert the thumb into the leg till the feet end. “Pinch” the feet end with your thumb and index finger.
2. Push the index finger into the sock while thumb withdrawing from the sock to turn the sock right side out.
3. When the feet surface to the opening, pull the whole leg right side out.
4. Repeat the same to the other leg.
 Finally, turn the body out. Smooth out all the seam line.
Turn the rest of the body parts, except the tail.
Stuff the legs with poly-fill stuffing material
 Fill the body round and to the firmness you like.
 1. Sew slip / ladder stitch on the opening about 1/8″ from the raw edge. Let the thread loose and don’t pull it yet.
2. After finish slip stitch the opening, pull the thread to close the opening.
3. With the needle still on the sock, wrap 2 to 3 rounds of thread on it, pull the needle through while pressing the wrapping thread with your finger.
4. Insert the needle some where near by and come out from the other side. Pull the thread and cut it close to the sock. The thread will be hidden in the sock neatly. Always do this when you sew
 ARMS
Stuff the arm with poly stuffing material until about 1/2″ from the opening.
Roll the monkey arm with you hands to make the stuffing even and nice. You can do this now and/or after sewing up the opening
 1. Stuffed monkey arms waiting to be sewn.
2. Run stitches about 1/4″ from the raw edge.
3. Pull the thread to gather a bit, push the raw edge into the arm.
4. Tighten up the opening by pulling the thread fully, make a few stitch across, knot and cut thread.
 Both arms waiting to be assembled to the sock monkey.
 ears
1. Stuff the ear with small amount of poly-fill. Fold the raw edges in and slip stitch.
2. Pull the thread to close the opening. Knot.
3. Fold the ear vertically and slip stitch the opening seam line.
4. The finished ear looks like this.
 tail
Cut a piece of batting or thick aquarium filter pad, 3 times the width of the tail and the length when it is stretched or partially stretched.
 Fold the batting three times and sew the end to the seam line of the tail end (wrong side).
Whip stitch the folded batting in place until the other end.
Sew the batting again to tail seam allowance about 1/4″ below the raw edge.
(Note: I used this method since stuffing with poly-fill to a long narrow tail is difficult and uneven.)
 1. The batting and the tail before turning.
2. Insert finger into the sock and pull the tail right side out, portion by portion. Only turn the sock not the batting.
3. Repeat (2) until you reach to the end. Continue with the turning by inserting the batting into the tail until it fully gets into it.
4. Adjust the batting so that it looks neat. Fold the raw edge in and stitch it up just like the arms method.
 ASSEMBLY
Body, arms, ears, tail, mouth, felt eye and button eyes are all set to be assembled into a sock monkey.
Divide the body into half, with top half being the face of the monkey where eyes and mouth are sewed to.
 Position the felt eye with the center point align to the middle of the face portion. Pin it and sew with blanket stitch.
You may want to decorate the felt eye with a line of running stitch with 6 strands of embroidery floss before sewing it on the fac
 Sew the button eyes to the marked positions of the felt.
To make the eyes attach to the face closely, insert your needle as deep as possible into the face, turn and come out to another point of the same eye. Pull thread tightly so that the eye attach closely to the face.
 1. Mark the mouth on the face with erasable fabric marker. The shape is rounded corner rectangular, with bottom align to the face’s border and top covers a little on the felt eye.
2. Fold and baste the raw edge of the mouth, then pin it in place. Slip stitch around until you are about 1″ away from the starting point.
3. Stuff the mouth fully. Continue to slip stitch to the starting point to complete the mouth.
4. Embroidery branch stitches across the middle of the mouth. Tips: look out for the toe seam line of the sock, this is where the middle is.
 1. Sew ears on the side of the face with slip stitch around (front and back of the ear).
2. The front of the ear is aligned to the side line of the monkey.
3. Position of tail.
4. Sew it with slip stitch around too.
 Sew the arm on the marked position with slip stitch around. Knot the thread and insert the needle to the other side of the arm position. Pull the thread so that arm “squeezes” into the body, knot to secure the shape.
Sew another arm with slip stitch.
If you think that the arms are not “sunken” enough, pass the needle to the other side, pull the thread to get the result you want, knot the thread securely.
 Provided you stuff you monkey very dense, sometime, you may find the monkey head is a little tall and pointy, this is normal due the shape of the adult sock. I found that kid’s and toddler’s sock do’t have this problem.
If you are happy with it, then it is OK. But, if you want to make the monkey head round like the one I made, the following step will be helpful.
 1. The original pointy head due the toe compartment of the sock.
2. Pinch the top of the head to judge how much you want to sew to make it rounder. Mark the space with erasable marker. Gradually decrease the width from center towards the front and the back.
3. Join both lines with slip stitch.
4. Here is it, a rounder head for the monkey.